A Serial ATA-compatible power cable or adapter (sold separately). The dell manual made it appear that all I needed to do was plug and play (after I turned the drive on in BIOS - f2 at startup, go to drives, See More: BIOS does not detect SATA HDD Report • ✔ Best Answer Tubesandwires May 14, 2012 at 21:12:22 The bios not detecting a BOOTABLE hard drive is a separate thing I just added a second SATA hard drive, a 500GB Seagate (ST3500631NS). http://upxpress.net/hard-drive/windows-xp-new-install-fails-hd-partitions-not-recognizd.php
First, load up the Windows Vista disc in your drive and press any key to boot from the disc. 2. I hope this helps others with the same problem. The new hard drive was unformatted. For me, I will then pull the jumper on the drive, making it a "slave" and put it on the other drive, making it "master." (If I rebooted then, it would http://www.tomshardware.com/forum/244697-32-sata-drive-detected-bios-windows-disk-management
Note: When you see the message, No signature found on Disk 1, press YES. Isn't Windows beautiful? Click Next to continue. In almost all cases, you will want to work with the bottom window.
I can use the command line feature in the system recovery. Can you help me? Will I wipe any data from my hard drive if I do this repair? Hard Drive Detected In Bios But Not During Windows 7 Installation If you have an opportunity, can you plug the external drive into another computer and see if it behaves the same?6.
Great, concise post. I appreciate any help! The Science of Tearing Paper-bag Handles How do I calm a frustrated 6-year-old? try here If you borrow a floppy drive and a floppy data cable from another computer, you can install the SATA drive controller drivers from a prepared floppy disk after pressing F6 near
That is what happened to me and need assistance. Hard Drive Shows Up In Bios But Not Disk Management Windows 10 Get the one that you burn to your own CD-R. In the new Computer Management window expand "Storage" if necessary and click on Disk Management. AnonymousSep 7, 2009, 3:31 PM I am user, not an expert, but i decided to install my own second drive (Hitachi 500 gb) in my Dell Dimension 9200 running Vista Home
I was able to use ubuntu to boot from cd to access my data to safely remove anything important to me. https://www.computing.net/answers/windows-xp/bios-does-not-detect-sata-hdd/200182.html Now right-click on the unallocated space and choose 'new partition'. Hard Drive Shows Up In Bios But Not Windows 10 When all the choices are made, go ahead with the Partition operation.When that is done, come back to this new Partition and RIGHT-click again and choose to Format it. Install/diagnostic/repair Software From Seagate Drive electronics are extremely sensitive to static electricity.
Save the settings and exit the setup program. http://upxpress.net/hard-drive/windows-wont-recognize-drives.php Thanks for this tutorial :) Brian says: 5 years ago This just saved my day. Was a good learn as well. Run Start Up repair (Vista and Win 7 only). Second Hard Drive Not Showing Up In Disk Management
So I can't look into the Linux drive from XP. To know more about Dell's products, services and drivers & downloads, please go to http://dell.to/YBlak6 Helpful +2 Report Miggin 1Posts Saturday November 9, 2013Registration date November 9, 2013 Last seen Nov Choose the language, time, currency, etc and click Next. have a peek here i have a toshiba satellite A205-s5000 laptop, which has VERY BASIC bios options, and none of those which u mentioned.
If the Hard Drive is not detected in another computer also, you need to replace the Hard Drive. Hard Drive Shows Up In Bios But Not Windows 8 Your damaged MBR will now be replaced with a new master boot record and your computer should now be able to boot properly. Was this answer helpful?
See in Thread ↓#1 DanJ May 14, 2012 at 12:46:54 You'll need to "slipstream" the driver into your XP install disc. For setup or other questions beyond physical installation of your Western Digital hard drive, please contact your Linux/Unix vendor. Otherwise, it will not work in Windows 2000. Windows 10 Not Seeing Second Hard Drive Primary (C:) drive installation during Windows Vista setup: Make sure your drive is detected by your controller or in BIOS during bootup.
I wanted to get rid of ubuntu, and I deleted it like one of the sites said, and they said that Windows should start up automatically. Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get IT Center Brands Tutorials Other sites Tom's Guide Tom's When all the choices are made, go ahead with the Partition operation.When that is done, come back to this new Partition and RIGHT-click again and choose to Format it. http://upxpress.net/hard-drive/windows-won-t-recognize-one-of-my-hard-drives.php TO BE CONTINUED: decaJan 16, 2010, 8:57 PM Hi guys and girlsI also have a 1 tera byte Hitachi hard drive that is seen on the initial boot up screen,but not
Installing a SATA Hard Drive on Windows 2000: Single Install: For proper installation of a drive using Windows 2000, simply allow the operating system to partition and format the drive during Every new blank hard disk drive or RAID volume (JBOD, Simple Volume, RAID array) installed within Windows will need to be partitioned, formatted and mounted to define and address a new The LOWER RIGHT pane shows you those PLUS some other hardware that Windows cannot use yet for whatever reason. All Rights Reserved.
Leave the allocation unit size at default and label the drive as desired. some documents I moved some days ago to the recycle bin. I also try to reseat the HDD to other PC but result the same problem. Ubuntu can not boot, but that's not so important…The problem is that the "grub" took over MBR, and now I can't boot Vista sitting on the other HDD when I disable
The upper one shows you only the devices Windows already knows how to use. SATA hard drives are the same size and shape as EIDE hard drives and are installed in exactly the same way with one big difference: one SATA port connects to one Flashing my bios to the latest version made me notice something about the way the raid controller was handling my drives. Partitioning/Formatting: Note: In two separate windows, on the right side of the screen, a graphical representation of the partitions on the installed drives will be displayed.
A Full Format will do a Quick Format, then go though every sector of the drive and test it, marking off any faulty ones (very rare) so they won't be used. Hit F2 at boot screen -> Main -> SATA Mode -> IDE This will allow Window XP to see your SATA. I have Windows XP on the primary and Ubuntu on the secondary. any other ideas?
Start Windows XP and allow the Operating System to boot to the desktop. Do you plan to move your OS to the new int and make it your boot drive? Restart the system to make sure the drive is detected. What size Partitions / Volumes do you want?
How do I fix this problem? Once you have connected the cable to the drive, connect the other end into the SATA host adapter card, or the motherboard. I checked advanced and both my hard drives show up as well as the DVD, etc. If it's an IDE drive you may need to change a jumper setting on the back of the drive. .........There are TWO ways you can get around XP not having any