Planning for the network First, how many computers do you need to network together? Under the Modem tab, set the port speed to match the speed of the async port configuration. network interface card. Seems a pretty solid arrangement, and cost me two decent drives and an extra stick of PC133 RAM, as the rest was a throw-away from a local agency.
Sponsored Links Windows XP Clean Installing Windows XPInstalling Win9x with XP Installing XP in DOS Dual Booting 2 OS's Creating Home Network Review of Windows XP Windows XP FAQ other sections Verify that the maximum speed of the COM port is set to match the speed configured under the async port on the Access Server side. If it is exactly two computers only, you only need a Crossover Ethernet Cable to connect the computers to each other. This will enable you to share files across the network.
Wired /wireless, which is best, what's a good price and most of all can XP and 98 be hooked together so you see I'm in need of help!!! ip address 10.10.10.10 255.255.255.0 encapsulation ppp async mode interactive peer default ip address 10.10.10.11 no cdp enable ppp authentication chap ! Nokia N95 NSeries Past Projects PHP AJAX Domain Availability Checker Planescape: Torment Ultima Worlds Windows XP Windows Vista More... AlbanianArabicBulgarianCatalanChineseCroatianCzechDanishDutchEnglishEstonianFilipinoFinnishFrenchGalicianGermanGreekHebrewHindiHungarianIndonesianItalianJapaneseKoreanLatvianLithuanianMalteseNorwegianPolishPortugueseRomanianRussianSerbianSlovakSlovenianSpanishSwedishThaiTurkishUkrainianVietnamese
Click OK to return to the Remote Access Setup window. However, ADSL and other dial-up internet services require configuration such as username, password and PPoE selection. version 12.1 service timestamps debug datetime msec no service password-encryption ! Highlight Internet Protocol (TCP/IP) by clicking it once, and click on Properties.
The network device is the center - all computer's Network Interface Card's connect to it via the Ethernet cable. 2. if not, how do I uninstall it?) and each computer has a log on that is used for the other computer. Then set the 98 computer to obtain its IP address automatically. Enter any number as the phone number (for example, 12345), and click Next.
Double-click on the Control Panel icon. TIA Ask a Question Sign up for Free 149 Experts currently online. Right-click Local Area Connection, Properties. I was told by someone that it is possible without a router.
Create a new dial-up connection as follows: Choose Start > Control Panel > Network and Internet Connections > Create a connection to the network at your workplace. Click OK. Click or right click on the printer and look for an option such as connect or set as default printer. I have one DSL line going to router, both computer get the DSL line.
i was trying to add a new computer to an existing wireless network,but i had a problem i couldn't do it.can you please help me on how i can get through How and what do i need? Click OK twice to finish the installation. The Modems Properties window is displayed.
You may be interested in our other Windows XP guides. Use the generic null modem by Dial-up Networking, following these steps: Choose My Computer > Dial-up Networking. Click Have Disk. It will only cost you a cable and a second NIC...approximately what?
Click the Null-Connection icon to highlight it. The tested working configuration, along with the debugs of the Access Server, are shown below: ! Upon successful PPP connection to the Access Server, issue the winipcfg command on Windows 2000 to determine the IP address assigned by the Access Server to the PPP dial-up client adapter.
Click Finish to complete installation of a generic null modem. Back up your registry first... I know some one will provide a link to give you some basics so I will leave that for now... This document is Copyright(©) 2001-2008 by G.Ganesh. 26 comments new post [ expand all ] Page: Prev 1 2 Next Show All Sunny0414 (1 posts) Thanks a million for this info.
line aux 0 !--- AUX port or any other async port. Wait a few moments, and right-click the connection, Enable. I found the tutorial on setting up the shares on XP, but I do not know how to do that on 98.Since I couldn't view the other computer with Zone Alarm Use known good cables and adapters to connect the PC running Microsoft Windows and the Access Server as shown in Scenario 1, Scenario 2, Scenario 3, or Scenario 4.
If you don't like this, please don't read any further. The IP address will be stated in the "Connection status" field. 5) What is the fastest way to transfer files from another PC? You would hook your DSL to it like you would a computer and then run the same type of cable from the router to the two computers. Now I have started browsing the net for wired routers and it looks like they have gone the way of the dinosaurs, wireless seems the preferred system now but sounds like
The adapter will disappear. Under Advanced Settings, the default Flowcontrol Hardware should remain selected. If you don't have this value, you can create it. Also ensure that Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks is checked.
To install the mdmcisco.inf file, add a modem as follows: Choose Start > Control Panel > Printers and Other Hardware > Phone and Modem Options. Mine was set at 11. Is that correct? Click Next.